veda-banner veda-banner
English
USD
Popular
Other
BitFex.Trade
BitFex.Trade
ICO
Site unavailable
First cryptocurrency exchange, developing based on the requirements of traders and that has profitable conditions for trading.
Category: Exchange
Founded: Feb 1, 2018
Country: World
Sadly, you’ve exceeded the limit of adding to favorite.
The limit possible is 5
Increase the limit
Go to website MVP is ready
Registered on Neironix

Information about ICO

Platform Ethereum
Accepted ETH
Start date Sep 1, 2020
End date Oct 31, 2018
Token price 1 BITFEX =
Released tokens 100 000
Soft cap
Hard cap
Minimal amount 1 BITFEX
Token BITFEX - 33.3957786560$
Periods
Time to start
376
DAYS
17
HOURS
53
MINUTES
59
SECONDS
01.09.2020
0.00%
BITFEX (BITFEX)
BITFEX (BITFEX)
Token
Ethereum
Utility
ERC-20
Platform: Ethereum
trade -
Smart contract - BitFex.Trade
pragma solidity ^0.4.24;

contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender)
    public view returns (uint256);

  function transferFrom(address from, address to, uint256 value)
    public returns (bool);

  function approve(address spender, uint256 value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

library SafeERC20 {
  function safeTransfer(ERC20Basic token, address to, uint256 value) internal {
    require(token.transfer(to, value));
  }

  function safeTransferFrom(
    ERC20 token,
    address from,
    address to,
    uint256 value
  )
    internal
  {
    require(token.transferFrom(from, to, value));
  }

  function safeApprove(ERC20 token, address spender, uint256 value) internal {
    require(token.approve(spender, value));
  }
}


library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (a == 0) {
      return 0;
    }

    c = a * b;
    assert(c / a == b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return a / b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
    c = a + b;
    assert(c >= a);
    return c;
  }
}

contract Crowdsale {
  using SafeMath for uint256;
  using SafeERC20 for ERC20;

  // The token being sold
  ERC20 public token;

  // Address where funds are collected
  address public wallet;

  // How many token units a buyer gets per wei.
  // The rate is the conversion between wei and the smallest and indivisible token unit.
  // So, if you are using a rate of 1 with a DetailedERC20 token with 3 decimals called TOK
  // 1 wei will give you 1 unit, or 0.001 TOK.
  uint256 public rate;

  // Amount of wei raised
  uint256 public weiRaised;

  /**
   * Event for token purchase logging
   * @param purchaser who paid for the tokens
   * @param beneficiary who got the tokens
   * @param value weis paid for purchase
   * @param amount amount of tokens purchased
   */
  event TokenPurchase(
    address indexed purchaser,
    address indexed beneficiary,
    uint256 value,
    uint256 amount
  );

  /**
   * @param _rate Number of token units a buyer gets per wei
   * @param _wallet Address where collected funds will be forwarded to
   * @param _token Address of the token being sold
   */
  constructor(uint256 _rate, address _wallet, ERC20 _token) public {
    require(_rate > 0);
    require(_wallet != address(0));
    require(_token != address(0));

    rate = _rate;
    wallet = _wallet;
    token = _token;
  }

  // -----------------------------------------
  // Crowdsale external interface
  // -----------------------------------------

  /**
   * @dev fallback function ***DO NOT OVERRIDE***
   */
  function () external payable {
    buyTokens(msg.sender);
  }

  /**
   * @dev low level token purchase ***DO NOT OVERRIDE***
   * @param _beneficiary Address performing the token purchase
   */
  function buyTokens(address _beneficiary) public payable {

    uint256 weiAmount = msg.value;
    _preValidatePurchase(_beneficiary, weiAmount);

    // calculate token amount to be created
    uint256 tokens = _getTokenAmount(weiAmount);

    // update state
    weiRaised = weiRaised.add(weiAmount);

    _processPurchase(_beneficiary, tokens);
    emit TokenPurchase(
      msg.sender,
      _beneficiary,
      weiAmount,
      tokens
    );

    _updatePurchasingState(_beneficiary, weiAmount);

    _forwardFunds();
    _postValidatePurchase(_beneficiary, weiAmount);
  }

  // -----------------------------------------
  // Internal interface (extensible)
  // -----------------------------------------

  /**
   * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met. Use super to concatenate validations.
   * @param _beneficiary Address performing the token purchase
   * @param _weiAmount Value in wei involved in the purchase
   */
  function _preValidatePurchase(
    address _beneficiary,
    uint256 _weiAmount
  )
    internal
  {
    require(_beneficiary != address(0));
    require(_weiAmount != 0);
  }

  /**
   * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid conditions are not met.
   * @param _beneficiary Address performing the token purchase
   * @param _weiAmount Value in wei involved in the purchase
   */
  function _postValidatePurchase(
    address _beneficiary,
    uint256 _weiAmount
  )
    internal
  {
    // optional override
  }

  /**
   * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends its tokens.
   * @param _beneficiary Address performing the token purchase
   * @param _tokenAmount Number of tokens to be emitted
   */
  function _deliverTokens(
    address _beneficiary,
    uint256 _tokenAmount
  )
    internal
  {
    token.safeTransfer(_beneficiary, _tokenAmount);
  }

  /**
   * @dev Executed when a purchase has been validated and is ready to be executed. Not necessarily emits/sends tokens.
   * @param _beneficiary Address receiving the tokens
   * @param _tokenAmount Number of tokens to be purchased
   */
  function _processPurchase(
    address _beneficiary,
    uint256 _tokenAmount
  )
    internal
  {
    _deliverTokens(_beneficiary, _tokenAmount);
  }

  /**
   * @dev Override for extensions that require an internal state to check for validity (current user contributions, etc.)
   * @param _beneficiary Address receiving the tokens
   * @param _weiAmount Value in wei involved in the purchase
   */
  function _updatePurchasingState(
    address _beneficiary,
    uint256 _weiAmount
  )
    internal
  {
    // optional override
  }

  /**
   * @dev Override to extend the way in which ether is converted to tokens.
   * @param _weiAmount Value in wei to be converted into tokens
   * @return Number of tokens that can be purchased with the specified _weiAmount
   */
  function _getTokenAmount(uint256 _weiAmount)
    internal view returns (uint256)
  {
    return _weiAmount.mul(rate);
  }

  /**
   * @dev Determines how ETH is stored/forwarded on purchases.
   */
  function _forwardFunds() internal {
    wallet.transfer(msg.value);
  }
}

contract TimedCrowdsale is Crowdsale {
  using SafeMath for uint256;

  uint256 public openingTime;
  uint256 public closingTime;

  /**
   * @dev Reverts if not in crowdsale time range.
   */
  modifier onlyWhileOpen {
    // solium-disable-next-line security/no-block-members
    require(block.timestamp >= openingTime && block.timestamp <= closingTime);
    _;
  }

  /**
   * @dev Constructor, takes crowdsale opening and closing times.
   * @param _openingTime Crowdsale opening time
   * @param _closingTime Crowdsale closing time
   */
  constructor(uint256 _openingTime, uint256 _closingTime) public {
    // solium-disable-next-line security/no-block-members
    require(_openingTime >= block.timestamp);
    require(_closingTime >= _openingTime);

    openingTime = _openingTime;
    closingTime = _closingTime;
  }

  /**
   * @dev Checks whether the period in which the crowdsale is open has already elapsed.
   * @return Whether crowdsale period has elapsed
   */
  function hasClosed() public view returns (bool) {
    // solium-disable-next-line security/no-block-members
    return block.timestamp > closingTime;
  }

  /**
   * @dev Extend parent behavior requiring to be within contributing period
   * @param _beneficiary Token purchaser
   * @param _weiAmount Amount of wei contributed
   */
  function _preValidatePurchase(
    address _beneficiary,
    uint256 _weiAmount
  )
    internal
    onlyWhileOpen
  {
    super._preValidatePurchase(_beneficiary, _weiAmount);
  }

}

contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   * @notice Renouncing to ownership will leave the contract without an owner.
   * It will not be possible to call the functions with the `onlyOwner`
   * modifier anymore.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function transferOwnership(address _newOwner) public onlyOwner {
    _transferOwnership(_newOwner);
  }

  /**
   * @dev Transfers control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function _transferOwnership(address _newOwner) internal {
    require(_newOwner != address(0));
    emit OwnershipTransferred(owner, _newOwner);
    owner = _newOwner;
  }
}

contract FinalizableCrowdsale is TimedCrowdsale, Ownable {
  using SafeMath for uint256;

  bool public isFinalized = false;

  event Finalized();

  /**
   * @dev Must be called after crowdsale ends, to do some extra finalization
   * work. Calls the contract's finalization function.
   */
  function finalize() onlyOwner public {
    require(!isFinalized);
    require(hasClosed());

    finalization();
    emit Finalized();

    isFinalized = true;
  }

  /**
   * @dev Can be overridden to add finalization logic. The overriding function
   * should call super.finalization() to ensure the chain of finalization is
   * executed entirely.
   */
  function finalization() internal {
  }

}

contract PostDeliveryCrowdsale is TimedCrowdsale, FinalizableCrowdsale {
  using SafeMath for uint256;

  mapping(address => uint256) public balances;
  uint256 public totalTokensSold = 0;
  uint256 private hardCap;

  /**
   * @param _hardCap hard cap in tokens
   */
  constructor (uint256 _hardCap) public {
    hardCap = _hardCap;
  }

  function balanceOf (address _address) public view returns (uint256) {
    return balances[_address];
  }

  /**
   * @dev Withdraw tokens only after crowdsale ends and crowdsale is finalized.
   */
  function withdrawTokens() public {
    require(hasClosed());
    require(isFinalized);
    uint256 amount = balances[msg.sender];
    require(amount > 0);
    balances[msg.sender] = 0;
    _deliverTokens(msg.sender, amount);
  }

  /**
   * @dev Overrides parent by storing balances instead of issuing tokens right away.
   * @param _beneficiary Token purchaser
   * @param _tokenAmount Amount of tokens purchased
   */
  function _processPurchase(address _beneficiary, uint256 _tokenAmount) internal {
    require(totalTokensSold.add(_tokenAmount) <= hardCap);
    totalTokensSold.add(_tokenAmount);
    balances[_beneficiary] = balances[_beneficiary].add(_tokenAmount);
  }
}

contract RefundableBeforeSoftCapCrowdsale is Ownable, FinalizableCrowdsale {
  using SafeMath for uint256;

  // minimum amount of funds to be raised in weis
  uint256 public goal;

  // refund escrow used to hold funds while crowdsale is running
  // AfterSoftCapEscrow private escrow;
  AfterSoftCapEscrow private escrow;

  /**
   * @dev Constructor, creates RefundEscrow.
   * @param _goal Funding goal
   */
  constructor(uint256 _goal) public {
    require(_goal > 0);
    escrow = new AfterSoftCapEscrow(wallet, rate);
    goal = _goal;
  }

  /**
   * @dev Investors can claim refunds here if crowdsale is unsuccessful
   */
  function claimRefund() public {
    require(isFinalized);
    require(!goalReached());

    escrow.withdraw(msg.sender);
  }

  /**
   * @dev Checks escrow wallet balance
   */
  function escrowBalance() public view returns (uint256) {
    return address(escrow).balance;
  }

  /**
   * @dev Checks whether funding goal was reached.
   * @return Whether funding goal was reached
   */
  function goalReached() public view returns (bool) {
    return weiRaised >= goal;
  }
  
  function updateEscrowGoalReached() onlyOwner public {
    require(!isFinalized);
    require(goalReached());

    escrow.reachGoal();
  }

  function beneficiaryWithdraw() onlyOwner public {
    require(goalReached());

    escrow.beneficiaryWithdraw();
  }

  /**
   * @dev escrow finalization task, called when owner calls finalize()
   */
  function finalization() internal {
    if (goalReached()) {
      escrow.reachGoal();
      escrow.beneficiaryWithdraw();
    } else {
      escrow.enableRefunds();
    }

    super.finalization();
  }

  /**
   * @dev Overrides Crowdsale fund forwarding, sending funds to escrow.
   */
  function _forwardFunds() internal {
    escrow.deposit.value(msg.value)(msg.sender);
  }

}

contract Escrow is Ownable {
  using SafeMath for uint256;

  event Deposited(address indexed payee, uint256 weiAmount);
  event Withdrawn(address indexed payee, uint256 weiAmount);

  mapping(address => uint256) private deposits;

  function depositsOf(address _payee) public view returns (uint256) {
    return deposits[_payee];
  }

  /**
  * @dev Stores the sent amount as credit to be withdrawn.
  * @param _payee The destination address of the funds.
  */
  function deposit(address _payee) public onlyOwner payable {
    uint256 amount = msg.value;
    deposits[_payee] = deposits[_payee].add(amount);

    emit Deposited(_payee, amount);
  }

  /**
  * @dev Withdraw accumulated balance for a payee.
  * @param _payee The address whose funds will be withdrawn and transferred to.
  */
  function withdraw(address _payee) public onlyOwner {
    uint256 payment = deposits[_payee];
    assert(address(this).balance >= payment);

    deposits[_payee] = 0;

    _payee.transfer(payment);

    emit Withdrawn(_payee, payment);
  }
}

contract AfterSoftCapEscrow is Ownable, Escrow {
  enum State { Active, Refunding, Reached }

  event Reached();
  event WithdrawalsEnabled();
  event RefundsEnabled();

  State public state;
  address public beneficiary;
  uint256 public minimalValue;

  /**
   * @dev Constructor.
   * @param _beneficiary The beneficiary of the deposits.
   */
  constructor(address _beneficiary, uint256 _minimalValue) public {
    require(_beneficiary != address(0));
    beneficiary = _beneficiary;
    state = State.Active;
    minimalValue = _minimalValue;
  }

  /**
   * @dev Stores funds that may later be refunded.
   * @param _refundee The address funds will be sent to if a refund occurs.
   */
  function deposit(address _refundee) public payable {
    require(state != State.Refunding);
    require(msg.value >= 0.0011 ether); // minimal token price (TODO: update for ICO)
    super.deposit(_refundee);
  }

  /**
   * @dev Allows for the beneficiary to withdraw their funds, rejecting
   * further deposits.
   */
  function reachGoal() public onlyOwner {
    require(state == State.Active);
    state = State.Reached;
    emit Reached();
  }

  /**
   * @dev Allows for refunds to take place, rejecting further deposits.
   */
  function enableRefunds() public onlyOwner {
    require(state == State.Active);
    state = State.Refunding;
    emit RefundsEnabled();
  }

  /**
   * @dev Withdraws the beneficiary's funds.
   */
  function beneficiaryWithdraw() public onlyOwner {
    require(state == State.Reached);
    beneficiary.transfer(address(this).balance);
  }

  function withdraw(address _payee) public {
    require(state == State.Refunding);
    super.withdraw(_payee);
  }
}

contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) balances;

  uint256 totalSupply_;

  /**
  * @dev Total number of tokens in existence
  */
  function totalSupply() public view returns (uint256) {
    return totalSupply_;
  }

  /**
  * @dev Transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= balances[msg.sender]);

    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    emit Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256) {
    return balances[_owner];
  }

}

contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    returns (bool)
  {
    require(_to != address(0));
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(
    address _owner,
    address _spender
   )
    public
    view
    returns (uint256)
  {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(
    address _spender,
    uint256 _addedValue
  )
    public
    returns (bool)
  {
    allowed[msg.sender][_spender] = (
      allowed[msg.sender][_spender].add(_addedValue));
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(
    address _spender,
    uint256 _subtractedValue
  )
    public
    returns (bool)
  {
    uint256 oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

contract MintableToken is StandardToken, Ownable {
  event Mint(address indexed to, uint256 amount);
  event MintFinished();

  bool public mintingFinished = false;


  modifier canMint() {
    require(!mintingFinished);
    _;
  }

  modifier hasMintPermission() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Function to mint tokens
   * @param _to The address that will receive the minted tokens.
   * @param _amount The amount of tokens to mint.
   * @return A boolean that indicates if the operation was successful.
   */
  function mint(
    address _to,
    uint256 _amount
  )
    hasMintPermission
    canMint
    public
    returns (bool)
  {
    totalSupply_ = totalSupply_.add(_amount);
    balances[_to] = balances[_to].add(_amount);
    emit Mint(_to, _amount);
    emit Transfer(address(0), _to, _amount);
    return true;
  }

  /**
   * @dev Function to stop minting new tokens.
   * @return True if the operation was successful.
   */
  function finishMinting() onlyOwner canMint public returns (bool) {
    mintingFinished = true;
    emit MintFinished();
    return true;
  }
}

contract BitfexToken is MintableToken {
    string public name = "BitFex Token";
    string public symbol = "BITFEX";
    uint8 public decimals = 2;

    uint256 public PRE_ICO_TOKENS_AMOUNT = 2000000;
    uint256 public ICO_TOKENS_AMOUNT = 3000000;
    uint256 public OWNERS_TOKENS_AMOUNT = 4000000;
    uint256 public BOUNTY_TOKENS_AMOUNT = 1000000;
    uint256 public TOTAL_SUPPLY = PRE_ICO_TOKENS_AMOUNT + ICO_TOKENS_AMOUNT + OWNERS_TOKENS_AMOUNT + BOUNTY_TOKENS_AMOUNT;

    bool public mintingFinished = false;

    function preallocate(address _preICO, address _ICO, address _ownersWallet, address _bountyWallet) onlyOwner canMint public returns (bool) {
      assert(TOTAL_SUPPLY == 10000000); // check that total tokens amount is 100 000.00 tokens
      mint(_preICO, PRE_ICO_TOKENS_AMOUNT);
      mint(_ICO, ICO_TOKENS_AMOUNT);
      mint(_ownersWallet, OWNERS_TOKENS_AMOUNT);
      mint(_bountyWallet, BOUNTY_TOKENS_AMOUNT);

      mintingFinished = true;
      emit MintFinished();

      return true;
    }
}


contract PreICOCrowdsale is TimedCrowdsale, PostDeliveryCrowdsale, RefundableBeforeSoftCapCrowdsale {
    constructor
        (
            uint256 _openingTime,
            uint256 _closingTime,
            uint256 _rate,
            uint256 _goal,
            uint256 _hardCap,
            address _wallet,
            BitfexToken _token
        )
        public
        Crowdsale(_rate, _wallet, _token)
        TimedCrowdsale(_openingTime, _closingTime)
        RefundableBeforeSoftCapCrowdsale(_goal)
        PostDeliveryCrowdsale(_hardCap)
        {
        }

    /**
     * @dev Convert wei to tokens
     * @param _weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 _weiAmount) internal view returns (uint256) {
      return _weiAmount.mul(10**2).div(rate);
    }
}
Bounty program - BitFex.Trade - Ico - BitFex.Trade
Platform:
Reward:
Not set
Start date:
Sep 1, 2020
End date:
Oct 31, 2018
Distribution of tokens : (not set)
Available bounties
Following
Signature BT
Review
Translate
Sharing
Bitcoin
(-4.56%)
Ethereum
(-4.81%)
Ripple
(-3.90%)
Bitcoin Cash
(-1.91%)
Litecoin
(-2.76%)
Binance Coin
(-4.28%)
Tether
(0.00%)
EOS
(-1.94%)
Bitcoin SV
(-6.47%)
Monero
(-6.55%)
Stellar
(-4.25%)
UNUS SED LEO
(-2.76%)
Cardano
(-4.34%)
Tron
(-3.65%)
OKB
(-1.70%)
ChainLink
(-5.07%)
Dash
(-6.99%)
Tezos
(-3.86%)
IOTA
(-3.33%)
Ethereum Classic
(10.53%)
Support Center
Tracking of cryptocurrency markets has become even more convenient with our application.
Neironix Mobile App
Download for FREE
Download App
Create account
Sign in
Contact technical support
If you have any problems with the system, please describe the problem in the form below, or send your question to: support@neironix.io